ProScan CRT Television User Manual download pdf

Bell Fibe™ TV

remote guide

Fibe is a trade-mark of Bell Canada.

BATTERY INSTALLATION

1. Remove cover on back.

2. Insert 2 new AA alkaline

batteries.

PROGRAMMING THE REMOTE

TO CONTROL OTHER DEVICES

The remote will only control

a device that has been

selected by the appropriate

mode key (TV, DVD, and AUX).

You do not need to program

the remote to operate your

Bell Fibe TV receiver. Once

pressed, the mode keylight

will ﬂash. In order to control

other devices, you need to

tell the remote what types of

devices you have. Refer to

sections A and B. The volume

controls will control your Set

Top Box (Bell button) until the

TV device mode is setup. The

channel controls will always

control your receiver. If you

want to change this, you

should follow the steps in

Sections E & F.

To use your remote for other

devices, you will need to

setup the TV, DVD and AUX

mode keys to control the

devices (Section A).

Refer to the code list for a

list of supported brands and

models. If you do not ﬁnd the

brand of your device, refer

to section B for the search

function or section C for

instructions on the learning

feature.

If you have a TV/DVD, each

component may need to be

setup separately.

NOTE: The DVD and AUX

mode keys can be setup with

any code. The TV mode key

can only be setup with TV

codes.

A. MANUAL PROGRAMMING

Use the following steps to

setup mode keys:

1. Turn on the device you

want to program and

locate the 4-digit code

from the code list (see over).

2. Press and hold the mode

key. While holding it

pressed, press the SELECT

key for 1 second.

3. Release both keys, all of

the mode keys will ﬂash

then the selected mode

key light will stay lit.

4. Enter the 4-digit code.

5. Press the power key once.

The device should turn off.

If the device stayed on,

repeat steps 2 thru 5 trying

each code for your brand.

Repeat the steps above to

setup another device.

NOTE: If an invalid code is

entered or no key is pressed

for 30 seconds, the mode key

light will ﬂash for 3 seconds

and turn off. You will need to

start over.

B. USING THE

SEARCH FUNCTION

1. Turn on the device you

want to control.

2. Press and hold the mode

key and while holding it

pressed, press the SELECT

key for 1 second.

3. Release both keys, all the

mode keys will ﬂash then

the selected mode key light

will stay lit.

4. Press the power button

repetitively until the

selected device turns off.

Once your device has

turned off, press SELECT to

save the code.

5. If setup is successful the

mode key will turn off and

you are ready to setup

another device.

C. LEARNING

If the code for your device is

not found in the code list and

the search feature was not

able to ﬁnd the code for your

device, then the learning

feature will let you “learn”

functions from your original

remote.

IMPORTANT: Before using

the Learning feature of your

remote, please follow steps

1-5 in Section A. If you are not

able to ﬁnd a code for your

device in this manual, please

use “0000” as your code for

Step 4 of Section A.

C-I. Learning Commands

1. Press and hold the mode

key and while holding it

pressed, press the LEARN

key for 1 second then

release both keys.

2. All of the mode keys will

ﬂash and then the selected

mode key light remains on.

3. Press and release the key

that you want to teach.

4. While pointing your original

remote approximately

1 inch from the bottom of

your Bell Fibe TV remote,

press and hold the original

remote key until the mode

key light blinks once and

stays on. (If there is a

learning problem, the

mode key light blinks for

3 seconds and stays on. If

this happens, repeat steps

3 and 4 above.)

5. Repeat steps 3 and 4

above for each key you

want your Bell Fibe TV

Remote to learn.

6. Press and release the

LEARN key when all

desired remote commands

have been learned.

D. CLEARING COMMANDS

D-I. To Clear all Learned

Commands (under a single

mode)

1. Press and hold the mode

key and while holding it

pressed, press the LEARN

key for 1 second then

release both keys.

2. All the mode keys will ﬂash

and the selected mode key

light will stay on.

3. Press and release the

LEARN key once. The mode

key light blinks off.

4. Press and release the

DELETE key. The mode key

light turns off. All learned

commands are now

cleared.

D-II. To Clear all Learned

Commands (under ALL

modes)

1. Press and hold the mode

key (TV, DVD, or AUX) and

while holding it pressed,

press the LEARN key for

1 second then release

both keys.

2. All the mode keys will ﬂash

and the selected mode key

light will stay on.

3. Press and release the

LEARN key twice. The

mode key light blinks off.

4. Press and release the

DELETE key. The mode key

light turns off. All learned

commands in the remote

are now cleared.

E. VOLUME CONTROL

The volume controls will

control your receiver until

the TV device mode is

programmed,

E-I. Volume Always Controls

the Same Device

1. Press the TV key and

while holding it pressed,

press the SELECT key for 1

second.

2. Release both keys, all of

the mode keys will ﬂash

followed by the TV mode

key light remaining on.

3. Press and hold the MUTE

key for 3 seconds until the

TV mode key light brieﬂy

turns off then remains

on. Press and release the

mode key that you always

want to operate the

volume commands (Bell,

TV, DVD, and AUX). The

selected mode key light

will remain on.

4. Press and release the

MUTE key to save the

setting. The selected

mode key light will turn

off indicating a successful

setup. If the selected

mode key light ﬂashes for

3 seconds and turns off,

then the selected mode will

have no volume commands

of its own and will need to

start over from step 1.

E-II. Volume Control Depends

on Device Selected

1. Press and hold the TV

key and while holding it

pressed, press the SELECT

key for 1 second.

2. Release both keys, all of

the mode keys will ﬂash

followed by the TV mode

key light remaining on.

3. Press and hold the MUTE

key for 3 seconds until the

TV mode key light brieﬂy

turns off then stays on,

then release the MUTE key.

4. Press and release the

MUTE key to save the

setting. The TV mode key

light turns off indicating

successful setup.

NOTE: If a programmed

mode key has no volume

commands of its own, then

the volume control will

normally operate the TV. If

an invalid key is pressed,

the selected mode key light

ﬂashes for 3 seconds and

turns off. You will need to

start over.

If no key is pressed within

30 seconds, the selected

mode key light ﬂashes for 3

seconds and turns off. You

will need to start over.

F. CHANNEL CONTROL

SETUP OPTIONS

The channel controls

(Channel Up/Down, 0-9

and LAST) will always work

your reciever. If you’d like

the channel commands to

be sent to different devices

depending which mode

you are in, then follow the

instructions in Section F-I.

F-I. Channel Control Depends

on Device Selected

1. Press and hold the TV

key and while holding it

pressed, press the SELECT

key for 1 second.

2. Release both keys, all

of the mode keys ﬂash

followed by the TV mode

key light remaining on.

3. Press and hold the LAST

key for 3 seconds until the

TV mode key light brieﬂy

turns off then stays on,

then release the LAST key.

4. Press and release the LAST

key to save the setting. The

TV mode key light turns off

indicating successful setup.

F-II. Channel Always Controls

your Set Top Box (Factory

Default)

1. Press and hold the TV

key and while holding it

pressed, press the SELECT

key for 1 second.

2. Release both keys, all of

the mode keys will ﬂash

followed by the TV mode

key light remaining on.

3. Press and hold the LAST

key for 3 seconds until the

TV mode key light brieﬂy

turns off then remains on.

4. Press and release the Bell

mode key. The selected

mode key light remains on.

5. Press and release the LAST

key to save the setting.

The Bell mode key light

will turn off indicating a

successful initial setup. The

channel commands will

be setup for your reciever

regardless of what mode

is selected. If the selected

mode key light ﬂashes for

3 seconds and turns off,

then you will need to start

over from step 1.

G. MODE DEACTIVATION

1. Press and hold the mode

key to be deactivated

and while holding it

pressed, press the SELECT

key for 1 second.

2. Release both keys, all

mode keys will ﬂash and

then the selected mode

key light will remain on.

3. Enter the 4-digit code 1755.

Note the reciever mode

cannot be deactivated.

H. MULTIPLE DEVICE

POWER CONTROL SETUP

OPTIONS

After pressing the Bell key,

pressing the P

OWER key

turns the Set Top Box on or

off, AND turns on or off the

TV if it has been setup. If you

want the POWER key to turn

on other devices at the same

time you can enable these as

follows:

1. Press and hold the Bell

key and while holding it

pressed, press the SELECT

key for 1 second. Then

release both keys.

2. Press and release the

mode key (TV, DVD or AUX)

you want to enable.

3. Press and release the

1 key. If no mode key

is pressed in step 2 ALL

modes will be enabled.

To remove a mode from the

Power key:

1. Press and hold the Bell

key and while holding it

pressed, press the SELECT

key for 1 second. Release

both keys.

2. Press and release the

mode key (TV, DVD or Aux)

you want to disable.

3. Press and release the 0

key. If no mode key is

pressed in step 2, ALL

modes will be disabled.

NOTE: you can turn individual

devices on/off by pressing

the desired Mode key

followed by the POWER key.

I. BACKLIGHT

CANCELLATION FEATURE

You can turn the backlights

on or off.

1. Press and hold both the TV

key and the SELECT key.

Release both at the same

time.

2. Press GUIDE.

To reverse it repeat the same

steps again.

J. RESETTING TO FACTORY

DEFAULT

1. Press and hold both the

TV key and SELECT.

Release both keys at the

same time.

2. Press and hold DELETE for

3 seconds until the TV key

blinks and stays off.

3. If no key is pressed within

30 seconds, the remote

will turn off and return

to normal.

K. TROUBLESHOOTING

LEARNING

You can only learn TV codes

under the TV mode, DVD

codes under the DVD mode,

etc. If you are trying to learn

from a “Universal” remote, it

might have more than one

code type stored under a

mode.

a. No functions may be

stored under the LEARN

key, or in the Bell mode.

b. Depending on your original

remote, some keys may

not be learnable.

c. Only 1 original device

type can be learned per

individual mode.

d. Use only new batteries.

e. Keep at least 3 feet away

from incandescent or low

energy lights.

f. Before learning, clear all

learned commands (refer

to Section D-II) then try

learning 2 or 3 commands

initially.

g. Point your original remote

at the bottom end of your

Bell Fibe TV Remote so

both remotes are directly

in line with each other.

You may need to adjust the

height of either remote.

h. Avoid learning your

original remote’s Volume/

Mute, VCR or DVD

transport keys unless

you’re sure these operate

the same device.

i. If learning the ﬁrst or

second keys for a mode

results in continuous errors

then try the following:

• End the learn session by

pressing the LEARN key.

• Clear out the learned

commands for that mode.

• Adjust the distance

between the two remotes

to be closer or further

away.

• Try learning the original

remote for that mode

again.If problems reoccur

with the same key, check

to see if it works with

the original remote. Try

learning that key, under a

different clear mode. If

it learns SELECT then it

is likely to be a different

code type from the

others and cannot be

learned under the same

mode.

FIBETVERCM_remote_guide_ENG_V2 1 12/05/10 10:31 AM

1 2

Bell Fibe™ TV 1
CODE LIST 2

Summary of Contents

Page 1 - Bell Fibe™ TV

Bell Fibe™ TV remote guideFibe is a trade-mark of Bell Canada.BATTERY INSTALLATION 1. Remove cover on back.2. Insert 2 new AA alkaline batteries.

Page 2 - CODE LIST

Hitachi 0404 • 0407 0428 • 0419 • 0387 Irradio 0417 JVC 0398 • 0406 • 0408 • 0964 0900 • 1072 • 0418 • 0923 Kenwood 0400 • 0429 Konka 041

ProScan CRT Television User Manual

Browse online or download User Manual for CRT TVs ProScan CRT Television. Bell Fibe™ TV remote guide - Bell Support [en]

Summary of Contents

More documents for CRT TVs ProScan CRT Television

Comments to this Manuals

ProScan CRT Television User Manual

Browse online or download User Manual for CRT TVs ProScan CRT Television. Bell Fibe™ TV remote guide - Bell Support [en]

Summary of Contents

More documents for CRT TVs ProScan CRT Television

Comments to this Manuals

Related products and manuals for CRT TVs ProScan CRT Television